Plumbing Pipe Repair& ReplacementBolton & Manchester
From a single dripping joint to a full re-pipe of an old house, we repair and replace copper, plastic and lead pipework across Bolton and Greater Manchester — properly jointed, properly supported, pressure-tested.
Copper, plastic & lead • Pressure-tested • Workmanship guaranteed
25+ Years
Experience
Copper, MDPE, Plastic
Pipe Types
Workmanship
Guarantee
Gas Safe
Registration
Fixed Quote
Pricing
Pipe Repair & Replacement, Done Right the First Time
Pipework is the circulatory system of your home — every tap, radiator, toilet and appliance depends on it. When a section fails through corrosion, frost damage, mechanical impact or simply old age, the right fix is a properly jointed replacement, not a clamp or a smear of sealant.
We work with copper (15mm, 22mm, 28mm), MDPE blue mains pipe, push-fit and barrier plastic, and we're equipped to safely cut out and replace older lead and galvanised steel sections. Every repair is pressure-tested before we leave.
Common jobs include repairing pinhole leaks in central heating pipework, replacing failed compression joints, re-routing pipes around extensions or new kitchens, and upgrading ageing lead or steel supply pipes to modern materials.
Real Work Examples
Symptoms That Mean Your Pipework Needs Attention
Pipework failures rarely happen overnight — there are usually warning signs months in advance. Acting early turns a quick repair into a major job and limits water damage to your home.
Lead pipework is a particular concern: it contaminates drinking water and is now banned in new installations. If your supply pipe is lead (dull grey, soft to the touch, no magnetism), we recommend a planned upgrade to MDPE before it fails.
- Green or white staining on copper pipework indicates active corrosion
- Damp patches on ceilings below pipework — even small ones — are slow leaks
- Sudden drops in mains pressure can mean a buried supply pipe is leaking
- Banging or hammering noises often indicate loose pipe clips or worn fittings
- Low water flow at upstairs taps can be caused by furred-up old steel pipework
- Lead supply pipes contaminate drinking water and should be replaced
Our Process
Inspection
We assess the pipework, identify the cause of failure, and check for any related issues you should know about before quoting.
Quote
You receive a clear fixed-price quote covering parts, labour and time. No work begins without your agreement.
Isolation & Drain
We isolate the relevant section, drain it safely, and protect surrounding finishes before cutting in.
Repair or Replace
Damaged sections are cut out and replaced with appropriate copper, MDPE or plastic pipework, properly clipped and supported.
Pressure Test
Every repair is pressure-tested under working conditions to confirm it is fully watertight before we refill the system.
Why Choose Conroy
All Pipe Materials
Copper, MDPE, push-fit, barrier plastic, lead removal — we work with everything you'll find in a UK home.
Pressure-Tested
Every repair is tested under working pressure before we leave site. No callbacks for slow leaks.
Workmanship Guarantee
All our pipework repairs carry a full workmanship guarantee — we stand behind every joint we make.
Minimal Disruption
We expose pipework only where necessary and protect finishes. Re-instatement advice provided where access work is needed.
Lead Pipe Removal
We safely remove and replace old lead supply pipes with WRAS-compliant MDPE for clean, safe drinking water.
Honest Pricing
Fixed-price quotes before any work begins. You'll always know what the job costs before we start.
Technical Detail
Copper Pipework
Copper remains the gold standard for central heating and hot water pipework — durable, recyclable and easily jointed by soldering or compression. We use lead-free solder and WRAS-approved fittings throughout.
Plastic & Push-Fit
Modern barrier-plastic systems (Hep2O, Speedfit) are excellent for concealed and underfloor runs, with quick push-fit jointing and no risk of frost-bursting in mild cases. We use them where appropriate, not as a shortcut.
Lead Pipe Replacement
Lead supply pipes between the boundary stop tap and your internal stopcock are an old standard now banned. We replace these with 25mm or 32mm MDPE, often working with the water company where the lead extends into the public highway.
Hidden Pipework
For leaks behind walls or under floors, we use acoustic and thermal detection to pinpoint the failure before opening up. This minimises damage to plaster, tiles and floor coverings.
Re-piping a Whole House
Full re-pipes are major works typically carried out during renovations. We plan routes carefully to minimise notching of joists, support pipework correctly to prevent noise, and pressure-test the whole system before plastering or boarding.
Frequently Asked Questions
Looking for something else? Phil also covers 24/7 emergency plumbing, full boiler installation and boiler repairs, annual boiler servicing, central heating installation, power flushing, leak detection and landlord gas safety certificates (CP12). Browse the full list on our services page or see recent jobs and customer reviews.
Based in Bolton, we work across Bolton, Manchester, Bury, Blackburn, Chorley, Wigan, Preston and Salford. See all areas we cover, learn more about Phil Conroy, or get in touch for a free quote.
Related Services
Ready to Get ThisSorted Properly?
Speak directly to Phil. No call centres, no scripts — just honest advice, fair pricing, and work you can rely on.